Viewse VC-EX861, Инструкция по установке и эксплуатации

Страница: 10 / 42

brightness is extremely low. Normally the camera works on the
automatic state. In case the external brightness is lower than
1Lux, the camera can be switch to the Zero illumination state
automatically and icon appears on the screen. You can also
set the Zero illumination state manually.
3. Setup of the Menu of the Dome Camera
1. Basic Operation of the Menu
1.1
Call preset 64 or call preset 1 twice within 4 seconds to enter
the main menu by the control keyboard or by the matrix.
1.2 When the menu is displayed on the screen, operate “TILT UP”,
“TILT DOWN” to move the cursor to the option to be set, operate
“PAN LEFT”, “PAN RIGHT” to modify the content or the order to
enter this option.
1.3 Keep the joystick in one direction for over 1 second to speed up
operation.
1.4 All setups on the menu couldn’t be lost even power failure
happens.
1.5 Special utilizations can be seen on the descriptions of functions
of the menu in detail.
2. Setup of the Menu
2.1 MAIN MENU
2.1.1 DISPLAY SETUP: to enter the submenu
of display of the screen by which ID
display, title display of preset point and
display of camera screen can be set.
2.1.2 CAMERA SETUP: to enter the submenu
of setup of normal data of camera.
2.1.3 CONTROL SETUP: to enter the submenu
of setup of control data over the dome camera.
2.1.4 CAMERA MASK SET: to enter the submenu of setup of mask
-6666 6