Viessmann Vitodens 111-W, Инструкция по установке и обслуживанию

Страница: 18 / 60

18
Commissioning steps
Inspection steps
Maintenance steps Page
• • •
1. Filling the heating system ................................................................................................. 19
•
2. Adjusting the pre-charge pressure of the diaphragm expansion vessel on the DHW
side (if installed) ................................................................................................................. 20
•
3. Filling the loading cylinder on the DHW side .................................................................. 21
• • •
4. Venting the boiler by flushing ........................................................................................... 21
• • •
5. Changing the gas type ...................................................................................................... 22
• • •
6. Checking the static pressure and supply pressure ........................................................ 23
•
7. Reducing the maximum heating output ........................................................................... 24
•
8. Matching the circulation pump rate to the heating system ............................................ 25
•
9. Matching the burner output to the flue system ............................................................... 26
•
10. Burner adjustment when connecting multiple flues to a shared flue system .............. 26
•
11. Checking the combustion quality ..................................................................................... 30
• •
12. Removing the burner ........................................................................................................ 32
• •
13. Checking the burner gasket and burner gauze assembly .............................................. 33
• •
14. Checking and adjusting the electrode ............................................................................. 33
• •
15. Cleaning the heat exchanger ............................................................................................ 34
• •
16. Checking the condensate drain and cleaning the trap ................................................... 35
• •
17. Installing the burner .......................................................................................................... 35
• • •
18. Checking the diaphragm expansion vessels and system pressure .............................. 36
• •
19. Checking the safety valve function
• • •
20. Checking all connections on the heating water and DHW sides for leaks
• • •
21. Checking the flue system for unrestricted flow and tightness
• • •
22. Checking the firm seating of electrical connections
• • •
23. Checking all gas equipment for tightness at operating pressure ................................ 37
• •
24. Fitting the front panel ........................................................................................................ 37
•
25. Setting display backlighting for standby ......................................................................... 37
•
26. Adjusting the display contrast .......................................................................................... 38
•
27. Setting the signal tone for display operation .................................................................. 38
•
28. Instructing the system user .............................................................................................. 38
Commissioning, inspection, maintenance
Steps - commissioning, inspection and maintenance
5697789