Viessmann VITOCAL 300-G, Инструкции по установке и обслуживанию для подрядчиков

Страница: 79 / 92

79
Parameter Code Delivered condition Commission-
ing
Maintenance/
service
Intensive ventilation C10C
■
Vitovent 200-W:
75 %
■
Vitovent 300-C:
125 m
3
/h
■
Vitovent 300-W:
225 m
3
/h
Background ventilation, second fan duct C189 15 %
Reduced ventilation, second fan duct C18A 25 %
Standard ventilation, second fan duct C18B 50 %
Intensive ventilation, second fan duct C18C 75 %
Bypass mode C1A0 0
Central heating and heat recovery C1A1 0
Imbalance permitted C1A2 1
Specified imbalance C1A3 0
Set reheater coil temperature C1A4 210 (
≙
21 °C)
Humidity sensor sensitivity C1A6 0
Min. temperature, geothermal heat ex-
changer C1AA 50 (
≙
5 °C)
Max. temperature, geothermal heat ex-
changer C1AB 250 (
≙
25 °C)
Function, input 1 C1B0 0
Min. voltage, input 1 C1B1 0 (10
≙
1 V)
Min. voltage, input 2 C1C1 0 (10 ≙ 1 V)
Flow rate correction C1C7 100
Note
The factory settings of parameters C101 to C1C7
depend on the ventilation unit and may differ from the
values specified here. The factory setting is displayed
in the service menu for each parameter with "Del
con ...":" " See "Vitotronic 200 service instructions".
Commissioning/service reports
Control parameter report
(cont.)
6153640
Service