Viessmann VITOCAL 300-G, Инструкции по установке и обслуживанию для подрядчиков

Страница: 10 / 92

10
< 42 V
230 V~/
400 V~
120
210
300
390
36
600
A B C D E
888
975
980
1081
1255
680
480
F
A B C D E
Fig. 1
A
Primary circuit flow (heat pump brine inlet), con-
nection Cu 28 x 1.5 mm
B
Primary circuit return (heat pump brine outlet),
connection Cu 28 x 1.5 mm
C
Secondary circuit flow (DHW cylinder), connection
Cu 28 x 1.5 mm
D
Secondary circuit flow (heating circuits), connec-
tion Cu 28 x 1.5 mm
E
Secondary circuit return (heating circuits DHW cyl-
inder), connection Cu 28 x 1.5 mm
F
Rear top panel, pivoted open
Siting and transport requirements
Transport
!
Please note
Impacts, compression and tensile loads can
cause damage to the outside panels of the
appliance.
Never put weight on the top, front or side panels
of the appliance.
!
Please note
Tilting the compressor at a steep angle inside
the heat pump can result in appliance damage.
Max. tilting angle: 45° for a very short time
For handling purposes, the heat pump module can be
removed: See page 13.
Preparing for installation
Requirements concerning on-site connections
6153640
Installation