ACT
Technical water inertial storage tanks
2
6020938-02
The manual of the ACT units contains all the necessary information for the ideal use of the equipment under
safety conditions for the operator thus meeting the requirements listed in the 2006/42/EC Machinery
Directive and following amendments.
1
PURPOSE AND CONTENTS OF THE MANUAL
This manual provides basic information as to the selection, installation, operation and maintenance of the
ACT storage tanks. It is intended for the operators of the appliance and it enables them to use the
equipment efficiently, even if they do not have any previous specific knowledge.
This manual describes the characteristics of the unit at the time in which it was put on the market. It must
therefore be considered appropriate with respect to any subsequent technological improvements
introduced by the company as part of its constant endeavour for enhancing the performance, ergonomics,
safety and functionality of its products.
The company, therefore, is not constrained to update the manuals for previous versions of machines.
The user is recommended to follow the instructions contained in this booklet, especially those concerning
safety and routine maintenance.
1.1
HOW TO KEEP THE MANUAL
The manual has to always be kept together with the unit it refers to. It has to be stored in a safe place, away
from dust and moisture. It must be accessible to all users who shall consult it any time they are in doubt on
how to operate the equipment.
The company reserves the right to modify its products and related manuals without necessarily updating
previous versions of the reference material. We also decline any responsibility for possible inaccuracies in
the manual if due to printing or transcription errors.
The customer shall store any updated copy of the manual or parts of it delivered by the manufacturer as an
attachment to this manual.
The company is available to give any detailed information about this manual and to give information
regarding the use and the maintenance of its own units.
1.2
GRAPHIC SYMBOLS USED IN THE MANUAL
Indicates operations that can be dangerous for people and/or disrupt the correct operation of the
unit
Indicates prohibited operations.
Indicates important information that the operator has to follow in order to guarantee the correct
operation of the unit in complete safety.
2
NORMATIVE REFERENCES
ACT units have been designed in compliance with the following directives and harmonized standards:
•
2006/42/EC, 2014/35/EU, 2014/30/EU, 2011/65/EU, 2012/19/EU Community Directives
•
UNI EN 378-1, 378-2, UNI EN 12735-1 standards
•
IEC EN 60335-2-40 standard
•
IEC EN 55014-1, IEC EN 55014-2, IEC EN 61000-3-2, IEC EN 61000-3-3, IEC EN 62233 standards
3
PERMITTED USE
•
The company excludes any contractual and extra contractual liability for damage caused to persons,
animals or objects, by incorrect installation, setting and maintenance, improper use of the equipment,
and the partial or superficial reading of the information contained in this manual.
•
These units have been designed only for technical water storage used for heating and cooling plants. Any
other use not expressly authorised by the manufacturer is considered improper and therefore not
allowed.
•
The installation place and the plumbing system must be established by the system designer and must
take into account technical requirements as well as any applicable local laws and specific authorisations.
