76
Checking the grate limit switch
Danger
Risk of crushing by and entanglement in the
grate gears
Do not reach into the gears.
Check the gear for actuating the grate limit switch in
the following cases:
■
If the grate is not horizontal in the end position.
■
If the gap between the grid elements is too large.
5.
6.
Fig. 58
5.
Remove left-hand casing.
6.
The gear for actuating the grate limit switch must
be in the switching position.
Note
The switching position of the limit switch is imple-
mented as a bore in the middle gear.
Commissioning, inspection, maintenance
Checking the grate end position and cleaning
(cont.)
5679249
