Viessmann D2RA, Инструкция по установке для подрядчиков

Страница: 70 / 164

70
Coding in the delivered condition Possible change
Party mode time limit
F2:8 Time limit for party mode or exter-
nal operating program changeover
via pushbutton: 8 h
*1
F2:0 No time limit for party mode
*1
F2:1
to
F2:12 Time limit adjustable from 1 to 12 h
*1
Start temperature raising
F8:–5 Temperature limit for terminating
reduced mode
–
5 °C; see example
on page 147.
Observe setting for coding address
"A3".
F8:+10
to
F8:–60 Temperature limit adjustable from
+10 to
–
60 °C
F8:–61 Function disabled
End temperature raising
F9:–14 Temperature limit for raising the re-
duced set room temperature
–
14 °C; see example on
page 147.
F9:+10
to
F9:–60 Temperature limit for raising the set
room temperature to the value se-
lected for standard mode adjustable
from
+10 to
–
60 °C
Set flow temperature increase
FA:20 Set flow temperature increased by
20 % when changing from opera-
tion at reduced room temperature
to operation at standard room tem-
perature. See example on
page 147. FA:0
to
FA:50 Temperature increase adjustable
from 0 to 50 %
Duration set flow temperature increase
Fb:60 Duration of the increased set flow
temperature (see coding address
"FA") is 60 min. See example on
page 147. Fb:0
to
Fb:240 Duration adjustable from 0 to
240 min
*1 In the "Heating and DHW" program, party mode ends automatically when the system changes over to operation at stand-
ard room temperature.
Code 1
"Heating circuit"
(cont.)
5678 044 GB
Codes