3.2.4
Sealing the shower channel
–
The seal set has to be handed over to the person respon‐
sible for the bonded sealing (tiler).
–
Only use the sealing accessories included in the scope of
delivery.
–
For wall mounting, work the sealing collar on the upright
wall into the bonded sealing.
Remove and dispose of the site protection.
*The flange must be clean and free from material residues.
Grease the sealing element.
Clip the sealing collar into the flange.
Check that the sealing element is properly positioned.
Fit the sieve insert.
Insert the wooden site protection.
Push the sealing collar into the flange as far as it will go.
All four fixing points must engage.
Handling
Advantix Cleviva shower channel base unit (reconstruction model)
21 from 30
