Manual Voice Server Espero © Vidicode 2009
35
4.10
Connection
This setting only applies to an Espero for Basic Rate ISDN. It will not
appear when your line type is Primary Rate.
There are two different line configurations possible for Basic Rate ISDN;
point-to-point and multipoint. Point-to-point is common when several
lines are connected to one PBX. Multipoint is for home users and small
businesses when several machines are connected to one line (fax, PC,
telephones). The signalling on the line is quite different and therefore
the Espero must be configured for either one or the other. When you
have a PBX it could still be possible the lines are multipoint because
most PBX’s can work with both systems. When in doubt, ask your
supplier.
4.11
Total lines
This setting only applies to an Espero Basic Rate. It will not appear when
your line type is Primary Rate.
Configure the number of lines the Espero acts on. This can be 2, 4, 6 or
8. If you use port 1 only, it must be set to 2, if you use port 1 and to 2, it
must be set to 4, etc, up to 8.
•
Press +
+
+
+ or ---- to increase or decrease Total Lines by 2.
4.12
Number list
The Number list is used to include or exclude telephone numbers from
recording. See the description of the Number list in Chapter 18.9. The
setting Number list determines whether the number list is used as
“blacklist” or “white list” or whether it is turned “Off”.
Total Lines: 8
NEXT - STOP
Connection: Point-to-point
NEXT CHANGE STOP
Содержание Espero Desktop
