66550060-EN - V1.0 - 04/02/14
44
IPVK - IPVKC Series IP videokit
IPVK-IPVKC - Installation handbook
Kristallo Series
Flush and surface videomonitor wall mounting instructions
FLUSH MOUNT KRISTALLO VIDEOPHONE
1. Protect the holes to fix the videophone to the flush mounting box then embed the flush mounting box in line with the wall in a
vertical position at 135cm height from the floor as sh wn in
figure 1.
2. As shown in
figure 2,
connect the wires using a fl t screw driver then setup the dip-switches as per provided connection dia-
gram or instruction sheet.
3. As shown in
figure 3,
once the wires are connected, fix the videophone to the flush mounting box using a Phillips screwdriver
and the two screws provided.
In order to avoid malfunctions, please do not over tighten the fixing screws shown in figure 3.
4. Once the videophone is fi ed to the flush mounting box, place the front plate against the videophone by inserting the hooks in
the corresponding openings and hook the plate by pushing it down as shown in
figure 4
.
5. Test the system for correct operation.
SURFACE MOUNT KRISTALLO VIDEOPHONE
6. As shown in figu e 1a, place the videophone against the wall at 135cm height from the floor and mark the fixing holes. Make the
holes (5mm diameter) and insert the provided wall plugs as shown in
figure 1b.
7. As shown in
figure 2a,
connect the wires using a fl t screw driver then setup the dip-switches as per provided connection dia-
gram or instruction sheet.
8. As shown in
figure 3a,
once the wires are connected, fix the videophone to the wall using a Phillips screwdriver and the two
screws provided.
In order to avoid malfunctions, please do not over tighten the fixing screws shown in figure 3a.
9. Once the videophone is fi ed to the wall, place the front plate against the videophone by inserting the hooks in the correspond-
ing openings and hook the plate by pushing it down as shown in
figure 4a
and hang the handset as shown in
figure 4b.
10. Test the system for correct operation.
