8
4212 PC SOFTWARE PROGRAMMING GUIDE
EN-UK - V.1.0 - 17/09/15
4212 PC Software Programming Guide
Before programming the 4212 digital panel the correct system
type must be selected from the top menu. To do this select
‘System’ from the top menu bar and then from the drop down
menu highlight and select ‘VX2200 Graphical Display’,
(as shown
to the right)
.
Once the correct system type has been selected the ‘settings’ tab on the main programmer screen
will change appearance and include additional programming options. Three additional selectable
tabs will also appear; ‘logo’, ‘coded access’ and ‘proximity access’, as shown below.
SETTINGS WINDOW
In the top left corner of the ‘settings’ window there are three editable text line fields. Line 1 Text field
will have ‘ENTER FLAT’ set as the default text that will first appear on the 4212 digital panel when
powered up. The other two text fields will be blank. All three text lines can be edited if required and
the text can be centred in the middle of the 4212 display by clicking on the justify button to the right
of the text field
(as shown below)
.
Line 1, 2 and 3 Text Fields
