35
4212 PC SOFTWARE PROGRAMMING GUIDE
4212 PC Software Programming Guide
EN-UK - V.1.0 - 17/09/15
• From Mem
- is the first memory location where the block ID information will be stored.
• To Mem
- is the last memory location where the block ID information will be stored.
• Block ID
- is the block ID
(from 1 to 15)
and is only required if the 4212 panel is connected
to a 2206N bus exchange device.
• Start
- when the parameters above have been set select this option to start the auto fill
feature.
• Name
- select this option from the drop down
menu, as shown to the right, to set the auto
fill parameters
(From Mem; To Mem; Text and
Start)
to input the name programming in the
name column. It should be noted that this
auto fill feature is only really useful if each
flat or apartment has the same designation
(e.g. flat 1, flat 2, flat 3 etc.)
. If the ‘#’ symbol is
• From Mem
- is the first memory location where the name information will be stored.
• To Mem
- is the last memory location where the name information will be stored.
• Text
- is the ‘common’ text that will be input into the name column.
• Start
- when the parameters above have been set select this option to start the auto fill
feature.
input before or after any text within the text field the auto fill feature
will include the flat number when in completes the data in the Name
column
(it will take the information provided in the Apt No. column, e.g.
Apt No. 125A with ‘Flat #’ input in the text field will display as Flat 125A)
. If individual users names
are required then they will need to be input manually in each name field down the name column.
• Floor
- select this option from the drop down
menu, as shown to the right, to set the auto
fill parameters
(From Mem; To Mem; Floor and
Start)
to input the floor number programming
in the floor column
(1 - 250 max.)
.
• From Mem
- is the first memory location where the floor
number information will be stored.
• To Mem
- is the last memory location where the floor number
information will be stored.
• Floor
- is the floor number of where the flat or apartment is located.
• Start
- when the parameters above have been set select this option to start the auto fill
feature.
