Videx 4212 Series страница 31 Скачать руководство пользователя

Страница: 31 / 44

4212 PC SOFTWARE PROGRAMMING GUIDE

4212 PC Software Programming Guide

EN-UK - V.1.0 - 17/09/15

• Exit

- select this option when all programming is finished and exiting out of the programmer

software.

(please note that when exiting out of the programmer software a prompt window will

appear asking if you want to save the current file before exiting, click on the required button. If saving

the file again it will be saved in the same file location as described under the Save As function).

SYSTEM

From the top menu on the main programmer screen when system

is selected the following drop down menu will appear as shown

on the right. Although there are four options shown in the drop

down list, the VX2200 Graphical Display should be selected as a

4212 digital panel is being used. The other three options will not

be applicable.

DOWNLOAD

From the top menu on the main programmer screen when download is selected then one of two

drop down menus will appear. In the settings window if the ‘Code or Fob’ option was set in the

security level menu then the download drop down menu, as shown below left, will appear. If the

‘Code + Fob’ option was set instead then the download drop down menu, as shown below right, will

appear.

The menu options available; Download All, Download Apartments & Settings, Download Codes and

Download Prox or Download Codes+Prox and Download Logo.

• Download All

- select this option from the drop down menu to download all settings, codes,

proximity fobs and any logo stored on the 4212 digital panel.

• Download Apartments & Settings

- select this option from the drop down menu to download

the apartment programming stored on the 4212 digital panel; Apt No., Phone ID, Block ID

(if

applicable)

, Access Code, Name and Floor number.

• Download Codes

(if the security level has been set to Fob or Code)

select this option to download

all coded access programming stored on the 4212 digital panel.

• Download Prox

(if the security level has been set to Fob or Code)

select this option to download

all proximity fob/card programming stored on the 4212 digital panel.

• Download Codes + Prox

(if the security level has been set to Code + Fob)

select this option to

download all coded access and fob/card proximity programming stored on the 4212 digital

panel.

Содержание 4212 Series













































Результаты поиска

Содержание 4212 Series

Отзывы:

Похожие инструкции для 4212 Series

Бренды по названию

Популярные бренды

Videx 4212 Series, Руководство по программированию

Результаты поиска

Содержание 4212 Series

Отзывы:

Похожие инструкции для 4212 Series

Бренды по названию

Популярные бренды