Videotec MAXIMUS MPX, Инструкция по эксплуатации

Страница: 11 / 116

Instruc
tion manual - English - EN
9 MNVXMPXTH264_1825_EN
1.3.5 Network Configuration page
From menu entry Network Configuration it is possible
to change the setting of the device. It is possible
to decide whether the device requires an address
assigned statically or dynamically with DHCP. The
device supports the Internet Protocol (IP) in version 4.
From the same page it is possible to configure 2 DNS
and decide which mechanisms must be enabled
to automatically identify the devices in the local
network.
Fig. 23
NTP Server: It is also possible to specify if the device
needs to be synchronised with an external NTP
(Network Time Protocol) server.
•
DISABLED: Select this option if you do not wish to
synchronise date and time of the device.
• STATIC: Select this option if you wish to
synchronise date and time of the device with
those of the NTP (Network Time Protocol) server
specified by the static address.
In order for the device to operate correctly,
it is necessary to synchronise it with the
VMS software using a NTP server.
1.3.6 User Configuration page
On the menu item, the users who can access the
device can be administered.
Fig. 24
The device can be configured only by users
with administration privileges.
1.3.7 Movement Parameters page
From menu entry Movement Parameters it is possible
to control, via web, all Pan & Tilt parameters.
•
Offset Pan: The pan & tilt has a mechanically
defined 0° position. The Offset Pan function allows
the definition of a different 0° position using
software.
• Fast Mode : It allows moving the Pan & Tilt at high
speed by moving the joystick to the end run.
• Economy Mode: It reduces the motor's torque
when the Pan & Tilt is at standstill to decrease
consumption. Do not enable in the presence of
strong wind or vibrations.
• Ceiling Mount : It rights the image and reverses
the handling controls.