Videotec MAXIMUS MPX, Инструкция по эксплуатации

Страница: 14 / 116

EN - English - I
nstruc
tion manual
12 MNVXMPXTH264_1825_EN
1.3.10 Digital I/O Page
From menu entry Digital I/O it is possible to configure
the digital channels available in the device. What
follows is a brief description of the configurable
parameters for each digital input.
•
Alarm ID: Field used to select the desired digital
input. The alarm input 5 is found in the housing.
For connection refer to the relevant chapter (AL,
COM, Network camera connection).
• Type: It indicates the default state of the digital
input.
• Action: Each input can be associated with an
action. The action is activated when the contact is
in a state other than default. The available actions
are listed below:
•
NONE: No action.
• SCAN: Position the pan & tilt on the selected
preset.
• PATROL: Activate the PATROL.
• AUTOPAN: Activate AUTOPAN.
• WIPER: Activate the Wiper.
• WASHER: Activate the glass cleaning sequence.
• RELAY 1: Activate Relay 1.
• RELAY 2: Activate Relay 2.
•
IR FILT:
Deactivate the camera's IR Filter. If
available, it turns on the LED illuminators.
To check correct operation of the alarms, a dot will
appear on the web page. The dot will be green
in normal conditions and red when an alarm is
detected.
Fig. 31
1.3.11 Washer page
From the menu, it is possible to configure the device
wash system functions.
Fig. 32