manualshive.com logo in svg

Videology 20Z704T-PZ30, Инструкция по эксплуатации, Страница: 6 / 49

Поделиться
Скачать
Videology 20Z704T-PZ30 Скачать руководство пользователя страница 6

 

Doc # INS-20/21Z704T-PZ30 

Issue Date: 07/28/2008 

Revision: A 

Page 6 of 49 

 

3.5.  OSD (On Screen Display) Menu 

An OSD menu is provided to display the status of the camera and to configure the functions 

interactively. 
 

The information such as Camera ID, Pan/Tilt Angle, Alarm I/O and Preset can be displayed 
on screen. 

3.6.  Alarm I/O Functions 

4 alarm sensor inputs and 2 alarm output relays are available. 
 
To reject external electric noise and shock, the alarm sensor input is decoupled with a photo 

coupler and the relay is used for alarm output. 
 

The signal range of the sensor input is from 5.0 DC to 12.0 volts. The maximum load of the 
relay contact is 250VAC/3A or 28VDC/3A. 

 
If an external sensor is activated, a camera can be set to move to the corresponding preset 

position. Meanwhile, the output relay can be matched to some specific preset positions to do 
counteractions such as turning on a light or sounding an alarm. 

3.7.  Reserved Presets for Special Purposes 

Most camera characteristics can be set easily and directly with a reserved preset, not 
entering into the OSD menu. For more information, refer to "Reserved Preset" in this 

manual (section 4.4). 

3.8.  Environmental Compatibility 

Fans and heaters are built into the camera for cold and hot temperature environments. The 

mechanical design protects the camera from water and dust. (IP 66). 

 

Содержание 20Z704T-PZ30


















































Отзывы:

Нет отзывов