![Videcon VHSD-870EXT Скачать руководство пользователя страница 91](http://html1.mh-extra.com/html/videcon/vhsd-870ext/vhsd-870ext_instruction-manual_1015195091.webp)
ANTIVANDAL OUTDOOR IP SPEED DOME CAMERA /
MPEG4 with Motion Tracking
91/95
My LINK light is not flashing or solid?
Verify the cable connection. 99% of the time the cable’s connection to the unit is causing this
problem. Try using a different network cable or crossover cable (for PC connection only). Try
reinserting the cable, if this still doesn’t solve the problem call our Support Center.
I want to prevent users from viewing my camera.
①
Go into Administration Tools of the IP Speed Dome.
②
Click on Users
③
Delete the user or all users by deleting the ID and password associated with that user.
Can I record the video?
Yes you can record, but you will need to purchase a separate software program to allow PC-based
recording. This software is available by contacting your distributor or our Customer Service
Center. The software named “I-PRO” will connect up to 16 separate 1-channel video servers for
remote viewing, remote controlling, and remote recording without the loss of quality or size (up to
640
480 resolution).
I can access the video server on my LAN, but not from the Internet.
Verify that your router (if applicable) has port forwarding properly configured. If accessing from
our DDNS service, verify correct serial number. Firewall issues may prevent user access.
How do I reset the unit to factory defaults?
On the underside of the unit you will find a recessed opening located near the top-left side of the
label. Power ON the unit and use a paper clip to push the reset button within that opening. You
should then see the ACTIVE light turn off and after a few seconds the ACTIVE light will begin to
flash, signifying a successful reboot. If the ACTIVE light does not turn off after depressing the
reset button, please try holding the button in for a few seconds and releasing. YOU WILL LOSE
ALL DATA THAT HAD BEEN ENTERED PREVIOUSLY AND THE IP SPEED DOME WILL BE SET TO
ITS FACTORY RESETS.
FAQ
9