![Videcon VHSD-870EXT Скачать руководство пользователя страница 58](http://html1.mh-extra.com/html/videcon/vhsd-870ext/vhsd-870ext_instruction-manual_1015195058.webp)
ANTIVANDAL OUTDOOR IP SPEED DOME CAMERA /
MPEG4 with Motion Tracking
58/95
Port Forwarding
After entering the correct TCP/IP settings you will be ready for “Port Forwarding” (Cases A, B).
Please record the TCP/IP settings of your IP Speed Dome for future reference. You may need this
information to access your IP Speed Dome and to configure “Port Forwarding”.
IP Speed Dome TCP/IP Settings
IP Address
Subnet Mask
Default Gateway
Primary DNS Server
DDNS Server
Web Server Port
Control Server Port
Video Server Port
Audio Transmit Server Port
Audio Receive Server Port
After clicking “Apply” the system will prompt for a reboot. Please allow the system 50
seconds to reboot and accept the changes. After 50 seconds, close the configuration screen.
The view will display “Trying to Reconnect”. If the ACTIVE light on the IP Speed Dome has
gone off and is now back on again flashing, then the IP Speed Dome has rebooted. After the
system reboots completely, remove the power supply from the unit and close Internet
Explorer.
Return your PC/Laptop TCP/IP properties to their original settings.
Before installing the IP Speed Dome, you must use “Port Forwarding” on your personal router
(Cases A, B).
You will need to forward 5 ports:
Web Server Port you assigned to the IP Speed Dome.
Control Server Port you assigned to the IP Speed Dome.
Video Server Port you assigned to the IP Speed Dome.
Audio Transmit Server Port you assigned to the IP Speed Dome.
Audio Receive Server Port you assigned to the IP Speed Dome.
Both of these ports will be forwarded to the IP address you assigned to the IP Speed Dome.
In the example above, you would forward:
8888
192.168.0.200
7777
192.168.0.200
7778
192.168.0.200
7779
192.168.0.200
7780
192.168.0.200
For information on how to use “Port Forwarding” please read Appendix C
NETWORK SETUP
5