ANTIVANDAL OUTDOOR IP SPEED DOME CAMERA /
MPEG4 with Motion Tracking
75/95
1x Zoom Wait
The time out of waiting after 1x zoom state. If camera loses a target object, it
will automatically zoom out to 1x to search the object lost. If there is no moving
object for a while, the camera will return to Home Position where “Motion
Tracking” starts.
Escape from
Oscillating
Environment
If there are oscillating object which is swaying left / right or up/down with
limited amplitude (like swaying tree), camera will be trapped to this object
forever since camera can not tell whether it is real moving object or not. To
escape from this kind of trap, we can assign escape conditions using two
parameters i.e. Oscillation magnitude and count. If this condition is reached,
the camera will return to Home to find out new moving object.
Oscillation magnitude
means percentage size of oscillation magnitude with
respect to camera view size (this size is depending on zoom ratio).
Oscillation
count
represents number of oscillation. To help understanding, let’s assume
oscillation magnitude is 10% and count is 50. If there is a leave swaying by
wind continuously and its amplitude of oscillation is roughly under 10% with
respect to view size of the camera, IP Speed Dome will count the number of
oscillation till it reaches 50. Then, IP Speed Dome will ignore this object motion
and make camera return to Home.
Object Size
There are 3 kinds of object size to be defined. To set up this easily, you must
understand three characteristic of Motion tracking feature.
1. If size of moving object is too big, IP Speed Dome will ignore this
object since it is likely to be noise, rain or Camera motion itself. In
other words, IP Speed Dome will track the object smaller than size in
the first box.
2. If size of moving object is small, IP Speed Dome will send a command
to increase the size by zooming in a little bit to see detail. In other
words, IP Speed Dome will make camera zoom in if the object is
smaller than size in the second box.
3. If size of moving object is big, IP Speed Dome will send a command to
reduce the size by zooming out a little bit not to lose the target. In
other words, IP Speed Dome will make camera zoom out if the object
is bigger than size in the third box.
ADMIN TOOL
7
