ANTIVANDAL OUTDOOR IP SPEED DOME CAMERA /
MPEG4 with Motion Tracking
89/95
I can’t connect!!
In the case of a connection failure.
Modem Reboot
Modem Reboot Finished
Router Reboot
Router Reboot Finished
IP Speed
Dome Reboot
IP Speed Dome Reboot Finish
Verify DDNS and IP Speed Dome connection, if
applicable.
How do I choose a unique IP address that matches my network?
For your home or small office, ensure that all devices on your network are running. PING an IP
address that you plan to assign to the IP Speed Dome. If you receive a “Request timed out”, then
you may use that IP address. To ensure the IP address that you will assign the IP Speed Dome
matches your network, review your “Current TCP/IP Settings” that you had recorded earlier. See
some examples below:
If your “IP Address” entry in “Current TCP/IP Settings” was 192.168.0.y, and your “Subnet
Mask” was 255.255.255.0 then use 192.168.0.x for your IP Speed Dome’s IP Address (“x”
meaning any number between 2-254 that you wish, as long as it passes the “PING” test).
If your “IP Address” entry is not a 192.168.z.y address with a “Subnet Mask” of 255.255.255.0
then please contact our Support Center.
If your “IP Address” entry is not a 192.168.z.y address, please contact our Support Center.
How do I open an MS-DOS or Command Prompt?
Windows 98 / ME Users
: Start
Programs
Accessories
MS-DOS prompt
Windows 2000 / XP Users : Start
(All) Programs
Accessories
Command Prompt
How do I “PING” an IP address?
①
Open an MS-DOS (or Command) prompt
②
At the prompt type - “ping xxx.xxx.xxx.xxx” (without the quotes and replace the “x”s with an
IP address)
③
Press Enter
How do I enable or check ActiveX on my browser
Open Internet Explorer
Tools on the menu bar
Internet Options
Security Tab
Custom
Level
Scroll down and verify that you are prompted or have enabled ActiveX controls and plug-
ins to be downloaded and executed.
click OK
restart browser
FAQ
9
