ANTIVANDAL OUTDOOR IP SPEED DOME CAMERA /
MPEG4 with Motion Tracking
50/95
⑤
Depicted below are several basic network scenarios. Determine which scenario describes
your network. If your network does not match one of the scenarios below and are unsure how
to setup your IP Speed Dome, please contact your network administrator, then call our Support
Center.
Case A : Dynamic IP or PPPoE + Personal Router [Most SOHO]
Configure your IP Speed Dome's TCP/IP properties as follows :
Network Type
STATIC (even though you have Dynamic IP from your ISP, use STATIC on the
IP Speed Dome)
Internet Address
A private IP address such as 192.168.0.200 [Example]
You need to assign the IP Speed Dome an IP address, just as you would
assign a PC.
The IP address you assign must be unique to your network as well as
match your network. For information how to choose a unique IP and
match your network please read the FAQ.
The IP address you assign the IP Speed Dome must be a private IP. For
information on how to chose a private IP please read the FAQ
Subnet Mask
255.255.255.0 [Example]
You must use the same subnet mask as the one you noted under
“Current TCP/IP Settings”
Dash line box signifies areas of tour network that you can't control.
Only the ISP has access to these devices.
NETWORK SETUP
5
