ANTIVANDAL OUTDOOR IP SPEED DOME CAMERA /
MPEG4 with Motion Tracking
64/95
How does Motion Tracking work?
The “Motion Tracking (MT)” means intelligent
moving object following using PTZ camera to get
the best incoming information to figure out
behavior of moving target
in the
region of
interest
.
Home Position:
This is the location where camera
waits for moving target object. If object is detected,
MT starts from this point. To track object repeatedly,
camera will return to Home when target is lost or
out of range. A position where MT start button is
pressed is set to be the Home position. It is
recommended that the Gate or the main Entrance is
a good candidate for Home position.
Region of interest:
This region is defined by pan and
tilt angle in Motion tracking menu in Admin tool. As
show in the drawing, it confine the maximum range of
MT activities. If MT reaches the limit, camera will
return immediately. Otherwise, camera will follow
other meaningless objects outside.
MT Procedures
:
(1) Wait at home till a moving target is detected.
The diction condition is defined by user in
Motion Tracking menu.
(2) Track a target by moving pan and tilt.
(2-1) Zoom out if target is too big. (Set the
size in Motion Tracking Menu.)
(2-2) Zoom In if target is too small. (Set the
size in Motion Tracking Menu.)
(3) Zoom 1x if the target is lost. If no more
movement are detected, return to home for
next target.
(4) Return to Home position if pan or tilt is out
of range.
WEB VIEWER
6
Wait at Home
Pan Limit
1
Tilt
Limit
Home
position
Region of Interest
Camera
View
Till Target detected
Tilt
Limit
Home
position
Tracking/Zooming
2
Camera
View
Tracking
by Pan Tilt
Zooming
If too small
Till lost
Pan Limit
Pan Limit
Tilt
Limit
Home
position
Wait if lost target
3
If out of Range
till Time out
Zoom 1X
Back to Home
Out of Range
Or
Lost Target
Too Many!!
Back To
Home
Back To
Home
4
till Time out
Back to Home
