ANTI-VANDAL 10x SPEED DOME CAMERA
6/96
Features
Network Video Interface
High frame are using hardware MPEG4 compression.
High frame rate with superior Video Quality
High speed : 30 fps at 720 x 480, 25 fps at 720 x 576
Web Browser based Viewer & i-Pro Multi Viewer supported.
Remote control for Pan/Tilt & Sensor I/O.
Bidirectional Audio support
Support with DDNS Service (www.net4c.net) for Dynamic IP
Hardware based Motion Detection function
Hardware based Intelligent Motion Tracking Algorithm (PMI-M200 Only)
Auto Map Generation (PMI-M200 Only)
Virtual Joystick is inspired by real Joystick (PMI-M200 Only)
Camera Specifications
CCD Sensor
: 1/4" Interline Transfer CCD
Zoom Magnification :
10 Optical Zoom,
10 Digital Zoom (Max
100 Zoom)
Day & Night Function
Various Focus Mode: Auto-Focus / Manual Focus / Semi-Auto Focus.
Independent & Simultaneous Camera Characteristic Setup in Preset operation
Powerful Pan/Tilt Functions
Max. 360
/sec high speed Pan/Tilt Motion
Using Vector Drive Technology, Pan/Tilt motions are accomplished in a shortest path. As a result,
time to target view is reduced dramatically and the video on the monitor is very natural to watch.
For jog operation using a controller, since ultra slow speed 0.05
/sec can be reached, it is very easy
to locate camera to desired target view. Additionally it is easy to move camera to a desired position
with zoom-proportional pan/tilt movement.
PTZ(Pan/Tilt/Zoom) Control
With RS-485 communication, max. 255 of cameras can be controlled at the same time.
Pelco-D or Pelco-P protocol can be selected as a control protocol in the current version of firmware.
INTRODUCTION
1
