ANTI-VANDAL 10x SPEED DOME CAMERA
42/96
Auto Exposure Setup
HOW TO USE OSD MENU
4
Backlight
[ON/OFF]
Sets Backlight Compensation
Day/Night
[AUTO1/AUTO2/DAY/NIGHT]
AUTO1 exchanges Day/Night mode faster than
AUTO2.
Brightness
[0~100]
Adjusts brightness of images. Iris, Shutter Speed
and
Gain
are
adjusted
automatically
in
correspondence with this value.
IRIS
[AUTO/MANUAL(0~100)]
If Iris is set to Auto, Iris should have highest
priority in adjusting AE and Shutter Speed
should be fixed.
If Iris is set to Manual, Iris should be fixed and
Iris has lower priority in adjusting AE, in
comparison with others.
Shutter Speed
[ESC/A. Flicker/Manual(
128~1/120000 sec)]
If Iris is set to Manual and Shutter Speed is set to
ESC, Shutter Speed should have highest priority.
If Shutter Speed is set to A. Flicker, to remove
Flicker, Shutter Speed should be set to 1/100 sec.
for NTSC and 1/120 for PAL.
AGC
[OFF/NORMAL/HIGH]
Enhances image brightness automatically in
case that luminance level of image signal is too
low.
SSNR
[OFF/LOW/MIDDLE/HIGH]
Enhances images by deducting noises when
gain level of images is too high.
SENS-UP
[AUTO(2~128)/OFF]
Activates Slow Shutter function when luminance
of image (signal) is too dark.
It is possible to set up the maximum number of
frames piled up one on another by Slow Shutter
function.
