ANTI-VANDAL 10x SPEED DOME CAMERA
34/96
Preset Setup
Preset Number
[1~128]
If a selected preset is already defined, camera
moves to pre-defined position and preset
characteristics such as Label and Relay Outputs
show on monitor. If a selected preset is not
defined,“UNDEFINED” shows on monitor.
Edit Preset Scene
Redefine current Preset scene position (i.e.
PTZ).
Edit Preset Label
Edits Label to show on monitor when preset
runs. MAX. 10 alphabets are allowed.
Clear Preset
[CANCEL/OK]
Delete current Preset data
CAM Adjust
[GENERAL/SPECIAL]
WB(White Balance) and AE(Auto Exposure) can
be set up independently for each preset. There
are 2 modes, "General" mode & "Special" mode.
The General mode means that WB or AE can be
set up totally and simultaneously for all presets
in "ZOOM CAMERA SETUP" menu.
The Special mode means that WB or AE can be
set up independently or separately for each
preset in each preset setup menu. Each Special
WB/AE value should activate correspondingly
when camera arrives at each preset location.
During jog operation, General WB/AE value
should be applied.
All Special WB/AE value should not change
although General WB/AE value changes. If
“Special’’ is selected, Menu to set WB/AE shows
on monitor.
Alarm out
Relay Output can be linked with Preset run.
Ex) If it is turned to ON, Output 1 relay will be
ON whenever you call this Preset.
4
HOW TO USE OSD MENU
