ANTI-VANDAL 10x SPEED DOME CAMERA
10/96
Parts Name & Functions
Main Unit / Surface Mount Bracket
Back of Main Unit
Dome Cover
Do not detach protection vinyl from dome cover before finishing all
installation process to protect dome cover from scratches or dust.
Surface Mount Bracket
This is used to install the camera directly on the ceiling. After
separating this cover first and then attach this directly to ceiling.
Camera must be assembled at the last stage.
Do not use this bracket when installing camera on the wall with wall
mount bracket or on the ceiling with ceiling mount bracket.
Lockup Screw
Fixes main unit to surface mount bracket.
Cabling Terminal Block
During installation, Power, Video, Communication, Alarm Input cables
are connected on to this cabling terminal block.
DIP Switch
Adjusts camera ID and protocols.
Ethernet Connector
This RJ-45 connector is for network connection and designed to operate
on 10 or 100 Mbps.
Reset Switch
Return all settings to their factory defaults. Care must be taken since
you will lose all data made previously.
ACTIVE LED
When in use, this Yellow indicator should always be flashing or
flickering. During reboots or power cycling, it may take several
seconds for the unit to initialize and illuminate the indicator.
INTRODUCTION
1
