Operator’s Manual Victory WC-8H
- Page 44 of 64 -
Version 2.0
7
MAINTENANCE AND REPAIR
This manual describes periodic maintenance that the owner can do. However, any care that
requires special tools or technical experience should be left to Victory authorized service
technicians.
Only qualified service personnel can carry out activities other than operating activities.
Maintenance tools are present in the Technical service department.
G EN ER A L W A R N I N G S F O R M A I N T EN A N C E :
•
Before inspecting, servicing, storing, or changing an accessory, shut off
the machine, remove the ignition key, and ensure all moving parts have
come to a complete stop.
•
Allow the machine to cool before storing it in an enclosure.
•
Always perform maintenance on a level and solid surface.
•
Only trained specialists with education and knowledge of the machine
and safety procedures are entitled to maintenance or service work.
•
Always strictly adhered to service intervals prescribed by the
manufacturer.
•
Always follow the maintenance schedule given in the Operator's manual
closely. Failure to do so may result in machine failure and costly repairs
or voided warranty.
•
Do not touch the fluid if you spot any leaking from hoses, pipes, or other
parts; it is dangerous and can lead to burns.
•
Provide adequate protection around moving or rotating parts, paying
attention to the risk of pinching.
•
Do not grease or oil the implement while it is in operation.
•
Only use genuine or equivalent parts.
•
Always use proper and good-quality tools.
•
Always prevent an accidental start; it can cause severe injury or death.
