User Manual for RIS Refrigerators
Victory
Rev. 10/20
Victory
8
UNPACKING AND SET UP
Carefully inspect the shipping carton for damage. This is the only time that shipping damage may be claimed. If damage is
suspected, open the carton immediately and, if there is damage, retain the carton and contact the shipper to make a claim.
Do NOT contact the manufacturer.
Uncrating
Tools Needed: ¾" box wrench, adjustable wrench, level, flat
head screw driver, and box cutter.
1. Remove the cardboard top capping, all clear tape,
and all staples including those at the bottom of the
cardboard carton and skid.
2. Start from the top of the carton. Using the box cutter,
carefully make one continuous cut to the bottom of the
skid. Remove cardboard carton and discard.
3. Move unit as close to final position as possible before
removing the skid.
Do NOT tip unit on its front or sides. If tipped onto the back,
unit must not be started for 3 hours.
Note: additional clear plastic protective wrap is applied
directly to any product with a glass door.
Skid Removal
Tip the unit forward and remove the skid.
1. Remove the shipping bolts using the ¾" box wrench
while cabinet is held in one direction.
2. Repeat the process while the cabinet is held in the
opposite direction.
Risk of personal injury.
Unit must be securely supported
while attaching casters or legs.
WARNING
Leveling
Cabinets must be leveled when installed. Level should be
measured on the headrail.
Failure to level your cabinet may result in door not sealing,
closing correctly, or condensed water not draining properly.
There are NO features in the Roll Thru cabinet for leveling,
The cabinet must be placed on a level surface.
