Victory MATV 48, Руководство оператора

Страница: 41 / 66

Operator
’s Manual Victory MATV Series
- Page 41 of 66 - Version 2.0
Maintenance table:
Interval:
Checks:
8 hrs/Daily: Weekly: Seasonal
Engine (See B&S
Operator’s manual)
◼ ◼ ◼
Remove excess crop gathered on deck:
◼ ◼ ◼
Remove excess crop wrapped around rotor ends:
◼ ◼ ◼
Visual check all fasteners:
◼ ◼ ◼
Check or grease Height adjusters:
◼ ◼ ◼
Grease Rear Roller:
◼ ◼ ◼
Grease Rotor Bearings:
◼ ◼ ◼
Check tires pressure:
◼ ◼
Inspect drive belt tension:
◼ ◼
Inspect Rotor bearing:
◼ ◼
Check Wheel bearings:
◼ ◼
Oil the towing coupling:
◼
Check height adjusters:
◼ ◼
Check side skids:
◼
Check the Safety decal's presence:
◼ ◼
Check all Safety guards are intact:
◼ ◼
Check Flail hammers condition:
◼
Check for Metal fatigue:
◼
Check Centrifugal clutch (Wear / Function):
◼
Info Rotor bearing inspection
Rotate the rotor shaft by hand and feel for any roughness in the bearings. Also, try to pull the shaft
from side to side to see if any movement is found. Suppose symptoms persist, strip down the
rotor-housing unit, and inspect bearings.
Info Wheel bearing inspection
Jack one side of the mower body up so the wheel is just off the ground. Rotate the wheel by hand,
and check the wheel alignment.
To check the bearing, try to move the wheel from left to right and feel for any play in the bearings;
ensure the wheel-locating bolt is tight before you start and follow any jacking procedures. If there
is any space, remove the wheel and inspect the bearings. Replace any faulty bearing.
7.4 Ordering Parts
Contact Victory Tractor Implements to order spare parts.
When ordering spare parts, you must always have the following information:
◼
Machine name and Type.
◼
Machine serial number.
◼
Part name.
◼
Part number.