Victaulic VE414MC, Инструкция по эксплуатации и техническому обслуживанию

Страница: 12 / 64

TM-VE414/415MC_12 REV_D
TM-VE414/415MC / Operating and Maintenance Instructions Manual
VERIFICATION OF PIPE ROTATION
DIRECTION
The VE414/415MC tool is equipped with a “JOG”
setting. Operating the tool in the “JOG” setting
allows for:
•
Determining rotation of the tool’s lower roll
• Confirming that the pipe to be grooved is
tracking properly on the lower roll
1.
Turn the main power switch on the side of the
tool to the “ON” position.
2. Pull the “EMERGENCY STOP” button on the
control panel to the out position.
3. Place the selector switch on the control panel
to the “NORMAL” mode.
4. Lower the depth stop as far as possible.
5. Depress the safety foot switch and wait for
the depth stop to bottom out and trigger the
motor. Confirm lower roll rotational direction,
then release the safety foot switch.