4
VE272SFS Roll Grooving Tool
17.
Do not over-reach.
Maintain proper
footing and balance at all times. Make sure
the safety foot switch is easily accessible for
the operator.
18.
Do not force the tool.
Do not force the
tool or accessories to perform any functions
beyond their capabilities. Do not overload the
tool.
19.
Do not operate the tool at speeds ex-
ceeding those specified in this manual.
20.
Do not abuse the foot switch cord.
Never yank the cord out of the receptacle.
Keep the cord away from heat, oil, and sharp
objects.
21.
Unplug the power drive from the elec-
trical source before servicing the tool.
Only
authorized personnel should attempt to per-
form maintenance on the tool. Always discon-
nect the power drive from the electrical
source before servicing or adjusting the tool.
22.
Maintain tools with care.
Keep tools
clean at all times to ensure proper and safe
performance. Follow the instructions for lubri-
cating tool components.
23.
When tools are not is use, store them
in a dry, secure place.
24.
Use only Victaulic replacement parts
and accessories.
Use of any other parts may
result in a voided warranty, improper opera-
tion, and hazardous situations. Refer to the
“Parts Ordering Information” and “Accesso-
ries” sections on page 35.
25.
Do not remove any labels from the
tool.
Replace any damaged or worn labels.
INTRODUCTION
The Victaulic VE272SFS tool is a semi-auto-
mated, hydraulic feed tool for roll grooving
pipe/tubing to receive Victaulic grooved pipe/
tubing products. The standard VE272SFS tool
is supplied with grooving rolls for 2 – 12-inch
steel pipe. Rolls are marked with the size and
part number, and they are color coded to
identify the pipe/tubing material. For roll
grooving to other specifications and materi-
als, refer to the Tool Rating and Roll Selection
on page 39. Grooving rolls for other specifica-
tions, sizes, and materials must be purchased
separately.
RECEIVING THE TOOL
VE272SFS tools are packed individually in
sturdy containers, which are designed for use
in re-shipping tools back to Victaulic upon
completion of the rental contract, when appli-
cable.
Upon receipt of the tool, make sure all neces-
sary parts are included. If any parts are miss-
ing, notify the Victaulic Tool Company.
NOTICE
• Drawings and/or pictures in this manual may be
exaggerated for clarity.
• The tool, along with this operating and maintenance
instructions manual, contains trademarks, copy-
rights, and/or patented features that are the exclu-
sive property of Victaulic Company.
CAUTION
• This tool must be used ONLY for roll grooving pipe/
tubing designated in the “Tool Rating and Roll
Selection” section of this manual.
Failure to follow this instruction could overload the
tool, resulting in reduced tool life and/or damage to
the tool.
TM-VE272SFS 3776 Rev_B.fm Page 4 Friday, December 3, 2004 12:10 PM
Содержание VE272SFS
Страница 2: ......
