VE272SFS Roll Grooving Tool
3
OPERATOR SAFETY INSTRUCTIONS
The VE272SFS is designed only for roll groov-
ing pipe/tubing. Use of this tool requires dex-
terity and mechanical skills, as well as sound
safety habits. Although this tool is manufac-
tured for safe, dependable operation, it is im-
possible to anticipate all the combinations of
circumstances that could result in an acci-
dent. The following instructions are recom-
mended for safe operation of this tool. The
operator is cautioned to always practice
“safety first” during each phase of use, includ-
ing setup and maintenance. It is the responsi-
bility of the owner, lessee, or user of this tool
to ensure that all operators read this manual
and fully understand the operation of this tool.
Read this manual before operating or servic-
ing this tool. Become familiar with the tool’s
operations, applications, and limitations. Be
particularly aware of its specific hazards.
Store this manual in a clean area where it is
always readily available. Additional copies of
this manual are available upon request
through the Victaulic Tool Company.
1.
This tool is designed ONLY for roll
grooving pipe/tubing sizes, materials, and
wall thicknesses listed in the "Tool Rating
and Roll Selection" section, starting on
page 39.
2.
Avoid using the tool in dangerous en-
vironments.
Do not expose the tool to rain,
and do not use the tool in damp or wet loca-
tions. Do not use the tool on sloped or uneven
surfaces. Keep the work area well lit. Allow
sufficient space to operate the tool properly.
3.
Ground the power drive to protect the
operator from electric shock.
Make sure the
power drive is connected to an internally
grounded electrical source.
4.
Prevent back injury.
During tool setup,
two people are needed to safely handle the
tool head assembly. Use a hoist to lift the tool
head assembly into position.
5.
Inspect the equipment.
Before using
the tool, check all moveable parts for any ob-
structions. Make sure guards and tool compo-
nents are installed and adjusted properly.
6.
Prevent accidental startups.
Place the
switch on the power drive to the “OFF” posi-
tion before plugging the unit into the electrical
source.
7.
Wear proper apparel.
Do not wear loose
clothing, jewelry, or anything that can become
entangled in moving parts.
8.
Wear protective items when working
with tools.
Always wear safety glasses,
hardhat, foot protection, and hearing protec-
tion.
9.
Stay alert.
Do not operate the tool if you
are drowsy from medication or fatigue. Avoid
horseplay around the equipment.
10.
Keep visitors away from the immedi-
ate work area.
All visitors should be kept a
safe distance from the equipment at all times.
11.
Keep work areas clean.
Keep the work
area around the tool clear of any obstructions
that could limit the movement of the operator.
Clean up any oil or other spills.
12.
Secure the work, machine, and acces-
sories.
Make sure the machine is stable. Re-
fer to the "Tool Setup" section on page 7.
13.
Support the work.
Support long pipe/
tubing lengths with a pipe stand that is se-
cured to the floor or the ground.
14.
Operate the tool only with a safety foot
switch.
The power drive must be operated
with a safety foot switch that is located for
easy operator access. Never reach across
moving parts. If the power drive does not con-
tain a safety foot switch, contact the power
drive manufacturer.
15.
Keep hands and tools away from
grooving rolls and stabilizer wheel during
the grooving operation.
Grooving rolls can
crush or cut fingers and hands.
16.
Do not reach inside the pipe/tubing
end during tool operation.
TM-VE272SFS 3776 Rev_B.fm Page 3 Friday, December 3, 2004 12:10 PM
Содержание VE272SFS
Страница 2: ......
