ASSEMBLY OF THE VAP131R
HYDRAULIC, ADJUSTABLE PIPE STAND
½ - 13 Nut
Bolt
Lock Washer
VAP131R Hydraulic, Adjustable Pipe Stands
are shipped with the track casters removed.
The track casters must be attached in order
to engage with the track system. Refer to the
drawing above.
The VAP131R operates on 120-volt AC power
(220 VAC as ordered) and is equipped with
a hand-controller that must be plugged
into the motor control base. Refer to the lift
manufacturer’s service manual, provided with
the shipment, for complete information regarding
power requirements and connections.
WARNING
• Secure all electrical wiring.
• DO NOT attempt to roll the VAP131R over
electrical cords.
Failure to follow this instruction could result
in serious personal injury and product
damage.
ASSEMBLY OF THE VAP131F
HYDRAULIC POSITIONER
½ - 13 Nut
Lock Washer
VAP131F Hydraulic Positioners are shipped with
the wheels removed. The wheels can be attached
to permit ease of transfer from one location to
another.
NOTE:
Refer to the drawing above and the
“Load Ratings” section for important information.
The VAP131F operates on 120-volt AC
power (220 volt as ordered) and is equipped
with a foot-controller that must be plugged
into the motor control base. Refer to the lift
manufacturer’s service manual, provided with
the shipment, for complete information regarding
power requirements and connections.
WARNING
• Secure all electrical wiring.
• DO NOT attempt to roll the VAP131F over
electrical cords.
Failure to follow this instruction could result
in serious personal injury and product
damage.
VAP131R TRACK CASTER
AND TRACK ENGAGEMENT
GOOD
BAD
BAD
TM-VAP131_12
REV_D
TM-VAP131
/ Operating and Maintenance Instructions Manual
