WARNING
1. Prevent back injury.
Always use proper
lifting techniques when handling tool
components .
2. Wear proper apparel.
Do not wear loose
clothing, jewelry, or anything that can
become entangled in moving parts .
3. Wear protective items when working with
tools.
Always wear safety glasses, hardhat,
foot protection, and hearing protection .
4. Keep hands and tools away from power
drive chuck during grooving operation.
Rotation of the power drive can pinch or
entangle fingers and hands .
5. Do not reach inside pipe ends during tool
operation.
Pipe edges can be sharp and
can snag hands and shirt sleeves .
7. Do not over-reach.
Maintain proper
balance at all times . Verify that all controls
are easily accessible to the operator .
8. Do not make any modifications to the
tool.
Do not remove any safety guarding
or any components that would affect tool
performance .
CAUTION
1. The RG1210 tool is designed ONLY for
grooving pipe sizes, materials, and wall
thicknesses as designated.
2. Inspect the equipment.
Before using
the tool, check moveable parts for
obstructions . Ensure that tool components
are installed and adjusted in accordance
with setup instructions .
3. Stay alert.
Do not operate the tool if you
are drowsy from medication or fatigue .
4. Keep visitors, trainees, and observers
away from the immediate work area.
All
visitors should be kept a safe distance from
the equipment at all times .
5. Keep work areas clean.
Keep the
work area around the tool clear of any
obstructions that could limit movement of
the operator . Clean up any spills .
6. Secure the work, machine, and
accessories.
Verify that the tool is stable .
Refer to the “Tool Setup” section .
7. Support the work.
Support pipe lengths
with a pipe stand or vise .
8. Do not force the tool.
Do not force the tool
or accessories to perform any functions
beyond the capabilities described in these
instructions . Do not overload the tool .
9. Maintain tool with care.
Keep the
tool clean to ensure proper and safe
performance . Follow the instructions for
matching and lubricating tool components,
if applicable .
10. Use only Victaulic replacement parts
and accessories
. Use of any other parts
may result in a voided warranty, improper
operation, and hazardous situations . Refer
to the “Parts Ordering Information” section .
11. Do not remove any labels from the tool.
Replace any damaged or worn labels .
5
REV_A
TM-RG1210
/ Operating and Maintenance Instructions Manual
Содержание RG1210
Страница 2: ......
Страница 22: ...This page intentionally blank ...
