Victaulic RG1210, Инструкция по эксплуатации и техническому обслуживанию

Страница: 4 / 24

HAZARD IDENTIFICATION
Definitions for identifying the various hazard
levels are provided below .
This safety alert symbol indicates
important safety messages . When
you see this symbol, be alert to the
possibility of personal injury .
Carefully read and fully understand the message
that follows .
DANGER
• The use of the word “DANGER” identifies
an immediate hazard with a likelihood
of death or serious personal injury if
instructions, including recommended
precautions, are not followed.
WARNING
• The use of the word “WARNING”
identifies the presence of hazards
or unsafe practices that could result
in death or serious personal injury if
instructions, including recommended
precautions, are not followed.
CAUTION
• The use of the word “CAUTION”
identifies possible hazards or unsafe
practices that could result in personal
injury and product or property damage
if instructions, including recommended
precautions, are not followed.
NOTICE
• The use of the word “NOTICE” identifies
special instructions that are important
but not related to hazards.
OPERATOR SAFETY
INSTRUCTIONS
The RG1210 Roll Grooving Tool is designed
for the sole purpose of grooving pipe . These
instructions must be read and understood by
each operator PRIOR to working with the
grooving tool . These instructions describe safe
operation of the tool, including set up and
maintenance . Each operator must become
familiar with the tool’s operations, applications,
and limitations . Particular care should be given
to reading and understanding the dangers,
warnings, and cautions described throughout
these operating instructions .
Use of this tool requires dexterity and
mechanical skills, as well as sound safety habits .
Although this tool is designed and manufactured
for safe, dependable operation, it is difficult to
anticipate all combinations of circumstances
that could result in an accident . The following
instructions are recommended for safe operation
of this tool . The operator is cautioned to always
practice “safety first” during each phase of
use, including set up and maintenance . It is the
responsibility of the lessee or user of this tool to
ensure that all operators read this manual and
fully understand the operation of this tool .
Store this manual in a clean, dry area where it is
always readily available . Additional copies
of this manual are available upon request
through Victaulic, or can be downloaded at
victaulic .com .
DANGER
1. Avoid using the tool in potentially
dangerous environments. Do not expose
the tool to rain, and do not use the tool in
damp or wet locations . Keep the work area
well lit . Allow sufficient space to operate
the tool properly .
4 REV_A
TM-RG1210 / Operating and Maintenance Instructions Manual