Victaulic RG1210, Инструкция по эксплуатации и техническому обслуживанию

Страница: 19 / 24

SHEAR PIN REPLACEMENT
If the tool will not travel around the pipe, one or
more of the shear pins must be replaced .
1. To access the shear pin in the depth feed
nut, turn the depth feed nut sideways to allow
room for the shear pin punch .
2a. To access the shear pins in the manual
drive nuts, unscrew the safety guard and set
aside .
2b.
Turn the manual drive nuts sideways to
allow room for the shear pin punch .
3.
Remove the shear pin using the shear pin
punch and replace with an intact shear pin . If
all provided shear pins have been used, contact
Victaulic to order replacements .
4.
Reinstall the safety guard .
PARTS ORDERING
INFORMATION
When ordering parts, the following information
is required for Victaulic to process the order and
send the correct part(s) . Parts can be ordered
by calling 1-800-PICK VIC .
1.
Tool Model Number
2. Tool Serial Number
3. Quantity, Item Number, Part Number, and
Description
4.
Where to send the part(s) – Company
Name and Address
5. To whose attention to send the part(s) –
Person’s Name
6.
Purchase Order Number
7. Billing Address
19 REV_A
TM-RG1210 / Operating and Maintenance Instructions Manual