background image

66

I-800

Warranty

®

VICTAULIC FireLock CPVC SPRINKLER SYSTEM PRODUCTS

W A R R A N T Y

Except as otherwise mandated by law, Victaulic (the “Company”) warrants that 
the goods which have been directly manufactured by them shall be free from 
defects in material and workmanship for a period of ten (10) years, from the 
date of shipment. CUSTOMER AGREES THAT THIS WARRANTY SHALL BE 
EFFECTIVE SO LONG AS THE GOODS ARE USED SOLELY FOR THE 
NORMAL PURPOSES FOR WHICH THEY ARE INTENDED AND IN ACCOR-
DANCE WITH THE VICTAULIC FireLock CPVC FIRE SPRINKLER SYSTEM 
DESIGN AND INSTALLATION MANUAL. VIOLATION THEREOF SHALL VOID 
THIS WARRANTY AND RELIEVE COMPANY FROM ANY OBLIGATION UNDER 
THIS WARRANTY. COMPANY CANNOT AND DOES NOT ASSUME RESPON-
SIBILITY, AND EXPRESSLY DISCLAIMS ANY LIABILITY, DUE TO CUS-
TOMER’S, ANY INSTALLER’S OR END USER’S FAILURE TO COMPLY WITH 
THE VICTAULIC CPVC MANUAL.

If Customer receives any goods that appear to be defective, Customer may 
return such questionable goods prepaid to Company at 4901 Kesslersville 
Road, Easton, Pennsylvania 18044, accompanied by a letter stating the nature 
of the problem. After examination if the goods are determined to be defective 
in materials or workmanship directly provided by Company, Company at its 
sole option, may either repair or replace the defective goods, or reimburse 
Customer for the cost of such goods. All costs of shipping such questionable 
goods and any replacements thereof to and from Company’s facility shall be 
borne by Customer. Customer agrees that Company will not be responsible for 
other parts or labor in connection with repairing, replacing, or returning such 
goods while goods are in possession of Company for analysis, nor for any 
delays beyond Company’s reasonable control (including, with limitation, 
delays due to unavailability of materials, equipment, other supplies or labor, 
strikes, governmental regulation or other acts of God), provided that any delay 
shall toll the warranty period for the same amount of time as the delay itself.

COMPANY EXTENDS ONLY THIS WARRANTY AND EXPLICITLY WAIVES ALL 
OTHER WARRANTIES, EXPRESSED OR IMPLIED, ORAL OR STATUTORY 
(INCLUDING ANY IMPLIED WARRANTIES OR AFFIRMATION, SUITABILITY, 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) APPLICA-
BLE TO THE GOODS. NO AFFIRMATION BY COMPANY OR ANY OF ITS 
REPRESENTATIVES, BY WORDS OR CONDUCT, SHALL CONSTITUTE A 
WARRANTY. THIS WARRANTY MAY NOT BE EXTENDED, ALTERED OR 
OTHERWISE MODIFIED EXCEPT BY WRITTEN AGREEMENT SIGNED BY 
COMPANY.

BY ITS ACCEPTANCE OF THE GOODS, CUSTOMER HEREBY SPECIFICALLY 
AND EXPRESSLY WAIVES ALL OTHER LIABILITY OR OBLIGATION OF ANY 
KIND OR CHARACTER OF COMPANY, INCLUDING WITHOUT LIMITATION 
LIABILITY PREDICATED UPON STRICT LIABILITY OR TORT, AND ALL 
DAMAGES AND LOSSES AS A RESULT THEREOF, INCLUDING BUT NOT 
LIMITED TO ALL KNOWN, UNKNOWN, FORESEEABLE, UNFORESEEABLE, 
ABSOLUTE, CONTINGENT, LIQUIDATED, NON-LIQUIDATED, COMPENSA-
TORY, GENERAL, SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR PUNITIVE 
DAMAGES, AND WITH RESPECT TO THE GOODS, THEIR RETURN, REPAIR, 
RESTORATION AND REPLACEMENT. Having independently inspected a 
sample of the goods as fully as desired or having refused to make such exan-
mination upon acceptance of delivery of the goods, and except as otherwise 
herein provided, Customer hereby accepts the goods in its “AS IS” condition 
“WITH ALL FAULTS” without any other warranty, expressed or implied, and 
hereby accepts and assumes the entire risk and cost of all necessary servic-
ing, repairs and remedy thereof. 

NOTICE

WARRANTY

I-800 2755 Rev_I.fm  Page 66  Tuesday, September 13, 2005  8:46 AM

Содержание FireLock I-800






































































Отзывы: