manualshive.com logo in svg

Victa RTS1226, Инструкция по эксплуатации

Поделиться
Скачать
Victa RTS1226 Скачать руководство пользователя страница 23

23

OPERATING

INSTRUCTIONS

Be aware of the trimmer head rotation. 
Bent shaft  

=   Clockwise. 

Straight shaft   =   Anti-Clockwise

Fence / Foundation Trimming

• Approach trimming around chain link fences, picket fences, rock walls and 

foundations slowly to cut close without whipping string against the barrier. If the string 
comes in contact with rock, brick walls, or foundations, it will break or fray. If string 
snags fencing, it will snap off.

Trimming Around Trees

• Trim around tree trunks with a slow approach so string does not contact bark. Walk 

around the tree trimming from left to right. Approach grass or weeds with the tip of 
the string and tilt cutting head slightly forward.

Use extreme caution when SCALPING. Keep a distance of 100 feet 
(30 metres) between operator, other people and animals during these 
operations.

Scalping

Scalping refers to removal of all vegetation down to the ground. To do this, tilt the 
cutting head to about 30 degree angle to the left. By adjusting the handle you will have 
better control during this operation. Do not attempt this procedure if there is any chance 
flying debris could injure operator, other people or cause damage to property.

Trimming Procedures continued

Not 

for  

Reproduction

Содержание RTS1226





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды