Victa RTS1226 Скачать руководство пользователя страница 2

Страница: 2 / 36

IMPORTANT

NOTES

Thank you for purchasing your VICTA trimmer. VICTA prides itself in the quality and
performance of all its products.

This instruction manual will aid in the assembly, safe operation and maintenance of your
trimmer.

Please read the following warnings to ensure safety and the long life of your product.

General safety regulations

Warning!

Always switch off the
machine and pull out the
spark plug boot

Read the directions
for use before
operating the machine.

Before carrying out any
maintenance work.

Wear safety goggles,
a helmet and ear
protection.

Do not use rigid cutting
disk.

Wear sturdy, non-slip
safety boots.

Do not use solid saw
edged blades.

Wear safety gloves.

All bystanders must be
kept at least 15 m from the
machine.

Protect the machine
from rain and damp.

Tool continues to run some
seconds after switching off
motor.

Be careful of objects
being thrown out!

CAUTION: Hot machine
parts. Keep your distance.

Please read the following

Not

for

Reproduction

Содержание RTS1226





































Результаты поиска

Содержание RTS1226

Отзывы:

Похожие инструкции для RTS1226

Бренды по названию

Популярные бренды

Victa RTS1226, Инструкция по эксплуатации

Результаты поиска

Содержание RTS1226

Отзывы:

Похожие инструкции для RTS1226

Бренды по названию

Популярные бренды