manualshive.com logo in svg

Victa RTS1226, Инструкция по эксплуатации

Поделиться
Скачать
Victa RTS1226 Скачать руководство пользователя страница 22

22

OPERATING

INSTRUCTIONS

Emergency Stop procedure

• If it becomes necessary to stop the machine immediately. Let go of the throttle lever 

and move the stop switch to 'OFF'.

Practical tips

• Practice all operating techniques with the engine switched off before you start to use 

the machine.

DO NOT use steel wire or plastic-coated steel wire of any kind with 
your Trimmer. Serious operator injury can result.

Periodically remove weed wrap to prevent overheating the drive shaft. 
Weed wrap occurs when strands of weed become entangled around 
the shaft beneath the debris shield. This condition prevents the shaft 
from being properly cooled. 

• Stop engine – Remove spark plug H.T. lead from spark plug.

• Remove Weed/Grass wrapped around Head/Shaft.

Trimming Procedures

• When properly equipped with a guard and cutting head, your unit will trim unsightly 

weeds and tall grass in those hard-to-reach areas – along fences, walls, foundations 
and around trees. It can also be used for scalping to remove vegetation down to the 
ground for easier preparation of a garden or to clean out a particular area.

Even with care, trimming around foundations, brick or stone walls, 
curves, etc. will result in above normal string wear.

Trimming / Mowing

• Swing trimmer with a sickle-like motion from side to side. Do not tilt the cutting head 

during the procedure. Test area to be trimmed for proper cutting height. Keep string 
head at same level for even depth of cut.

Switching Off the Engine

Not 

for  

Reproduction

Содержание RTS1226





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды