manualshive.com logo in svg

Victa RTS1226, Инструкция по эксплуатации

Поделиться
Скачать
Victa RTS1226 Скачать руководство пользователя страница 17

17

ASSEMBLY

PROCEDURES

Fitting the handle

1 Slacken the wing nut on the fastening screw on the handle. 

2 Remove the wing nut, washer and fastening screw from the handle. 

3 Push the Classic handle onto the shaft. 

4  Replace fastening screw and tighten with the wing nut.

Not too loose or too tight. Over tightening may damage the unit.

Universal Handle

Classic Handle

Correct

Wrong

2

1

3

Fitting the handle

(1) Components - 2 nuts, 'D' Grip Handle, Toggle 

handle and 'U' Bolt. 

(2) Place Universal Handle (2) over shaft. 

(3) Insert Toggle Handle (3) around shaft and into 

holes in Universal Handle.

(4) Screw on nuts (1) onto threads of 'U' Bolt by 

fingers only, with toggle in open position.

(5) Be sure only to thread nuts (1) down so the 

Toggle Handle has enough grip onto the shaft, 
when levered into the close position.

Not too loose or too tight. Over tightening may damage the unit.

Toggle open position

Toggle closed position

Not 

for  

Reproduction

Содержание RTS1226





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды