11
Item
Description
LAN RJ-45
Ethernet, RJ-45 port compatible with 10/100Mbps PoE
Power
Standard adapter jack for 12 VDC or 24 VAC
Alarm In
Alarm input and output, 5-pin terminal
GND
Alarm Out
Alarm COM
Audio In
Audio input, 2-pin terminal; line-level microphone
GND
Audio Out
Audio output, 2-pin terminal; amplified speaker
GND
GND
Ground
2.3 Installing and Adjusting Camera
Select a location that is clear of obstacles and can support the weight of the unit.
Exercise maximum caution when installing the unit to the wall or ceiling the unit
falling can result in injuries and accidents. As a failsafe against falling, attach the
unit by chain, wire cable or other safety restraint to an appropriate anchor point.
Step 1: Prepare the mounting holes
To provide for cable management, the camera can be mounted to a back box,
model V940D-BOX or using an adapter plate to allow mounting to a 4x4
electrical box, model V940-PLATE.
Note:
Make sure there is room for a cable routing hole at the location and drill a
hole to route the cables. Cabling should be routed to the installation location.
There is a desiccant bag in the dome. Do not remove this.
Содержание V942D-W310MIR-XW
Страница 6: ...4 9 User Settings 69 4 10 System Log 72 Appendix I Questions Solutions 73...
Страница 16: ...10 Cable Connections...
Страница 20: ...14...
Страница 83: ...VICON INDUSTRIES INC For office locations visit the website www vicon security com...