Vicon V942D-W310MIR-XW, Руководство по установке

Страница: 14 / 83

8
Shipping
Weight
2.54 lb (1.15 kg)
Certifications and Approval
Product
Certification
s
CE/FCC, ISO 9001:2008
1.6 Notes
1. After login, first perform network settings. The gateway IP address should be
set as that of the connected network camera.
2. The IP address cannot conflict with that of other devices; if there are conflicts,
the camera cannot be viewed.
3. If the camera utilizes a PoE power supply, connect equipment strictly
according to the parameters of the Power Supply Switcher. Additionally, a
practical test of maximum network cable length for the Power Supply
Switcher must be performed, to avoid camera failure caused by insufficient
power supplied to the Power Supply Switcher or to avoid the harm to the
Switcher.
These units should only be installed by a qualified technician using approved
materials in conformance with federal, state, and local codes. Read these
instructions thoroughly before beginning an installation. Always refer to Vicon’s
website to assure you have the most up-to-date manual, www.vicon-security.com .
The camera is supplied with an accessory kit that includes mounting hardware
(screws, anchors and grommets), an RJ-45 connector protective cover, a power
connector (2-pin screw terminal), replacement/spare locking screws (screws that
secure the camera module in its cradle), a BNC cable connector that allows
connection of spot monitor and an Allen tool to loosen the screws.