13
Re-install the clear dome assembly to the camera and secure with the screws.
Connections
Connecting to the RJ-45
Connect a standard RJ-45 cable to the network port of the network camera.
Generally a cross-over cable is used for direct connection to PC, while a direct
cable is used for connection to a hub. You can also use a router featuring PoE
(Power over Ethernet) to supply power to the camera. An RJ-45 connector
protective cover is supplied in the accessory kit to protect the connection.
Connecting Alarms
There are two dry contact alarm inputs and one alarm output provided; the alarm
output acts as a switch to drive an external device, such as a light. Refer to the
figure below for connection and utilization of alarm input and output.
Содержание V942D-W310MIR-XW
Страница 6: ...4 9 User Settings 69 4 10 System Log 72 Appendix I Questions Solutions 73...
Страница 16: ...10 Cable Connections...
Страница 20: ...14...
Страница 83: ...VICON INDUSTRIES INC For office locations visit the website www vicon security com...