* Priority: Tracking priority: Zone > Loitering > Abandon/Absent > Obj.
* Maximum 4 objects can be represented.
* Same priority: Continuing detect. And Obj. > Size
-
All Object
: Tracking all detected objects.
-
Loitering
: Tracking detected loitering object.
-
Abandon/Absent
: Tracking detected absent/abandon area.
-
Zone
: When zone event occurs, tracking the area.
<Picture/DNR (Picture/Digital Noise Reduction)>
Menu for adjustment of video quality and DNR.
1) Sharpness
:
Adjust sharpness of outlines
(0~15).
2) Enhancement
:
Select high resolution mode (Low/Mid/High).
3) 2D-NR
: Adjust 2D-NR strength.
4) 3D-NR
: Adjust 3D-NR strength. Remove noise by adding up several frames.
5) DNR Demo
: Represent DNR effect. Left side is no DNR screen, right side shows
DNR screen.
6) Color Enh (Color Enhance)
: Adjust color strength.
<Effect>
1) Freeze
: When [ENTER] key is pressed, still image is output on the screen.
2) d-Effect
: Off/Rotation/Mirror/V Flip
3) Nega (Negative Picture)
: Inverse color effect.
4) DIS (Digital Image Stabilization)
: Compensation for image vibration.
Use of this function causes d-PTZ screen magnification to change.
5) dPTZ Preset
: Configuration for d-PTZ preset. This will be applied when menu is
exited.
-
Zoom
: Adjust magnification.
-
Pan&Tilt
: Adjust Pan/Tilt position.
-
Up/Down
: Adjust tilt position.
-
Left/Right:
Adjust pan position.
6) i-Freeze:
Select time of refresh rate for output video. This function is useful to reduce
the recording data storage. When motion is detected during i-Freeze, image is refreshed
to live mode. This is used not only to reduce the recording data but also not to miss
object movement.
-
No Motion(s)
: Adjust Interval while no motion.
-
Motion (0.1s)
: Adjust Interval while motion exists.
<System Setup>
1) General
- Cam Info
: Display camera basic information.
NOTE:
* Cam ID/Baud rate/Protocol/Lens Type/CCD Type/Video System/Firmware Version
-
System Lock
: System locking by 4-character PID (Lock/Unlock).
-
Change PID
: Change PID used in the system lock.
NOTE:
* Enter PID: Input previous password. Default PID is “0000”.
* Enter New PID: Input new password.
* Retype New PID: Confirm new password.
- 10 -
- Title
: Change camera title (max. of 8 characters).
