-
R:
Adjust red color.
-
B
: Adjust blue color.
-
Push/Set
: Tracking WB of current screen and represent R, B values.
-
Default
: Restore R, B default values.
5) Fix/FL Mode:
Fixed color temperature mode (fluorescent lamp environment).
6) Fix/Outdoor Mode:
Fixed color temperature (6300 ºK) mode, for outdoor
environment.
<Auto Exposure>
NOTE:
* MIN_SHT (Minimum shutter speed):
NTSC: 1/60sec/PAL: 1/50sec
* MAX_SHT (Maximum shutter speed):
1/100000 sec
* FLC_SHT (Flickerless shutter speed):
NTSC: 1/100sec/PAL: 1/120sec
1) AE Mode
-
Full Auto
: DC Lens or Video Lens – Fix shutter speed to MIN_SHT.
Manual Lens - Operating as shutter mode.
-
Fast SHT (Fast shutter mode)
: Adjust range - 1/250~1/10000
-
SHT Fix (Shutter Fix Mode)
: Shutter speed is fixed at a given value.
NOTE:
* If lighting is not enough, noise may be increased.
* If lighting is enough using AGC maximum, automatically decreases shutter speed.
2) UDF (Ultra Deep Field)
Depending on lighting conditions and motion state, automatically adjusts AE and DNR.
Normally in low light environment, Sens-up feature may miss the movement of objects
and high AGC value increases the noise. UDF function effectively improves
this phenomenon.
NOTE:
* No Motion: Noise removal mode.
* Motion has occurred: Fast screen update mode.
3) Low Light
: If using UDF function, this function must be disabled.
-
AGC
: Boost the signal and adjust the brightness (Off/Low/Mid/High).
-
Sens-Up
: By adding up multiple fields, adjust the proper brightness in low light
conditions (2X~ 256X)
-
Apert
: In low light conditions, reduce noise by lowering the sharpness value.
-
Color
: In low light conditions, reduce noise by lowering the color value.
4) WDR (Wide Dynamic Range)/WDR-Lite
WDR function cannot be used with the BLC and is recommended in Full Auto Modes.
-
Visibility
: Increase sharpness of the high brightness region.
-
Comb Bal
(Combination Balance): Adjust the balance of high and low luminance
areas.
- Brightness
: Adjust brightness level of WDR.
5) BLC
: Backlight Compensation/BLC function cannot be used with WDR function.
-
EHLC (Excessive High Light Compensation):
Fill high brightness areas with gray
color; clip the area with more brightness than the threshold value.
Clip Th (Clipping Threshold)
: Adjust clipping level.
Clip Mask (Clip Mask Brightness)
: Select gray color of clipping area.
-
Auto
: Weight on the dark area of AE, splitting among the 9 areas.
- 5 -
-
Spot
: Weight on the specified area of AE.
