XX151-02-00 Rev 1206 Surveyor4A Fixed-Position Camera Dome
Introduction
•
1
Introduction
The information in this manual covers the installation, operation, and maintenance of the Surveyor4A Series
of In-Ceiling Fixed-Position Camera Domes. This unit should only be installed by a qualified technician using
approved materials in accordance with national, state and local wiring codes. Read this manual through
completely before attempting installation.
Vicon’s Surveyor4A Series of Fixed-Position Camera Domes offers a compact indoor domed housing
incorporating a fixed camera and lens combination. They are configured for in-ceiling installation. The domes
include a standard or high-resolution color or day/night camera with a choice of fixed-focal-length or varifocal
autoiris lenses. A smoked lower dome is included. A model is available that offers twisted pair video
connection. A UTP receiver is required for twisted pair configurations. Refer to Table 1 for complete model
descriptions.
The camera position is adjustable in four directions, allowing for adjustment of pan, tilt, vertical height in the
dome and rotation about the lens axis (roll), for any angle of view required. The varifocal lens allows for lens
adjustment capability and autoiris adjustment is available by a potentiometer. The cameras offer selection of
both internal crystal/line lock and iris control. The cameras accept 24 VAC input and include an isolated
power input. If a pendant configuration is required, use the V4A-H-P (XX151-21).
The Surveyor4A In-Ceiling Fixed-Position Camera Dome series meets FCC requirements for a Class A
device.