Vicon surveyor X971, Инструкция по установке и эксплуатации

Страница: 25 / 53

7. Install the Conduit fitting.
Figure 11
Cable Access Cap
8. Attach a T Bracket to an L Bracket using two
screws, flat washers and lock washers. Repeat
on the remaining brackets.
9. Slide two sections of a Caddy Rail through the
base of a T Bracket. Rotate the Caddy Rail Clips
so the open end is facing downward. Repeat with
the remaining Caddy Rail sections.
Figure 12
Dropped Ceiling Mount Adjustments
10. Install the remaining screws into the threaded
holes of the T Brackets. Snug them to hold Caddy
Rail position.
11. Attach a Mounting Bracket assembly to each pair
of threaded holes on the Housing top using two
Screws and Lock Washers.
12. Lift the entire assembly into the ceiling through an
adjacent grid space. Adjust the Caddy Rails, as
necessary, to seat the clips properly. Align the
clips to attain a proper “X” position.
13. Slide the Housing along the T Brackets and tighten
the screws to attain a proper “Y” position.
14. Slide the Housing within the T Bracket slots and
tighten the screws to attain a flush fit with the
ceiling.
X971 Rev 1098 Surveyor Mini Dome System Housing Installation
•
11