Vicon ROUGHNECK V-CELL-HD-A, Быстрое руководство по установке

Страница: 6 / 16

V-CELL-HD-A Quick Installation Guide
6
2) Installation (using Rear Cover)
1. Use rear cover as template to mark mounting and cable access holes.
2. Drill mounting and cable access holes in mounting surface.
3. Insert cable clamp into access hole, route cables through clamp and mount cover using appropriate
hardware.
4. Use camera mounting frame to mark its mounting holes, drill holes and mount using appropriate
hardware.
5. Terminate wires to camera board. Feed the excess wire back through cable clamp and tighten clamp.
6. Mount front plate to camera mounting frame.
Note: Installation of the rear cover is required for UL/Canadian UL compliance.