Vicon ROUGHNECK V-CELL-HD-A, Быстрое руководство по установке

Страница: 14 / 16

V-CELL-HD-A Quick Installation Guide
14
3.6 Resetting to the Factory Default Settings
To reset the network camera to the original factory settings, go to the Setup > System > Maintenance web
page (described in “System > Maintenance” of User’s Manual) or use the Reset button on the network
camera, as described below:
• Using the Reset Button
Follow the instructions below to reset the network camera to the factory default settings using the Reset
button.
1. Switch off the network camera by disconnecting the power adapter.
2. Press and hold the Reset button with a straightened paperclip while reconnecting the power.
3. Keep the Reset button pressed until the Status indicator blink.
4. Release the Reset button.
5. When the Power Indicator changes to Green (may take up to 40 seconds), the process is
complete and the network video camera has been reset.
6. The network camera resets to factory defaults and restarts after completing the factory reset.
CAUTION: When performing a Factory Reset, you will lose any settings that have been saved.
(Default IP 192.168.1.100)
System Requirement for Web Browser
Operating System: Microsoft® Windows® 98, Microsoft Windows ME, Microsoft Windows 2000, Microsoft
Windows XP, Microsoft Windows Vista®, Windows 7, Windows 8.1 or Windows 10.
CPU: Intel® Core™ 2 Duo 2GHz or higher, 1 GB RAM or more, 10 GB free disk or higher
VGA: AGP, Video RAM 32 MB or higher (1024x768, 24 bpp or higher)